EEC Analyzer Registration

This is the place for questions about things electrical and mechnanical...or any other automotive-related hardware issue.

Moderators: cgrey8, EDS50, Jon 94GT, 2Shaker

EEC Analyzer Registration

Postby roaster » Tue Oct 24, 2006 7:45 pm

I just bought a user license for EA, but can't see how to get it registered.
On the About tab of the program there is a registration button, with a space for the registration code.
Are they supposed to send me a number? There's no instructions for what to do .
I tried emailing from the EA site, but I'm not getting any reply.
Can somebody give me some guidance?
FFR5113K, 5.0 EFI, AFR165, 24#INJ, 70MM BBK TB, X3Z EEC, TrickFlow intake, 70MM FMS MAF, Stock Cam, 2.73 rear
User avatar
roaster
Gear Head
 
Posts: 7
Joined: Thu Oct 05, 2006 8:35 pm
Location: Annandale, VA

Postby Brian-Mc » Tue Oct 24, 2006 8:04 pm

When I got mine... I had to send Clint the Computer code and he in return sent me a registraion file.
306 (stock block),TFS Track Heat Heads, E303 Cam, TFS track heat intake, 70 mm TB, 75mm Pro-M,42 lb injectors,Aeromotive AFPR, 255 lph intank, Crane Hi-6/LX-92. Turbonetics 60-1 hi-fi

A9L using Binary Editor
Brian-Mc
Regular
 
Posts: 244
Joined: Sat Nov 29, 2003 11:43 pm
Location: Georgetown Ky

Postby roaster » Tue Oct 24, 2006 8:39 pm

Thanks for the info. I'll try emailing him again.
FFR5113K, 5.0 EFI, AFR165, 24#INJ, 70MM BBK TB, X3Z EEC, TrickFlow intake, 70MM FMS MAF, Stock Cam, 2.73 rear
User avatar
roaster
Gear Head
 
Posts: 7
Joined: Thu Oct 05, 2006 8:35 pm
Location: Annandale, VA

Postby codedout » Tue Oct 24, 2006 10:53 pm

Yup true, go to the about tab, click on register, get your system code and email it to Clint. He usually responds within a day. But you have to remember he is all by himself and like the rest of us a hobbyist. Howere a serious hobbyist. Send the system code to EECAnalyzer@charter.net
Mike
-
T4M0/CBAZA, 331 10.5:1, 30#inj, Prof Prod 70mm TB, Typhoon intake, E303 cam, HPP210 heads, x-pipe, shorties, tweecer, tunerpro, ProM MAF, MSD Blaster& Dist, flowmasters, Holley 255lph, Scorpion 1.6RR, AEM WB,UD Pull,KYB GR2, Granatelli upr lwr.
User avatar
codedout
Tuning Addict
 
Posts: 691
Joined: Sun Mar 26, 2006 10:49 am
Location: Hollywood/tampa, FL

Postby roaster » Fri Oct 27, 2006 3:38 pm

Four days now and no reply yet. :(
FFR5113K, 5.0 EFI, AFR165, 24#INJ, 70MM BBK TB, X3Z EEC, TrickFlow intake, 70MM FMS MAF, Stock Cam, 2.73 rear
User avatar
roaster
Gear Head
 
Posts: 7
Joined: Thu Oct 05, 2006 8:35 pm
Location: Annandale, VA

Postby codedout » Fri Oct 27, 2006 3:45 pm

that is too wierd. PM 86gt that is clint. Maybe your mail is getting cought in a spam filter or something.
Mike
-
T4M0/CBAZA, 331 10.5:1, 30#inj, Prof Prod 70mm TB, Typhoon intake, E303 cam, HPP210 heads, x-pipe, shorties, tweecer, tunerpro, ProM MAF, MSD Blaster& Dist, flowmasters, Holley 255lph, Scorpion 1.6RR, AEM WB,UD Pull,KYB GR2, Granatelli upr lwr.
User avatar
codedout
Tuning Addict
 
Posts: 691
Joined: Sun Mar 26, 2006 10:49 am
Location: Hollywood/tampa, FL

Postby 2Shaker » Sun Oct 29, 2006 7:18 am

Did you get it? Clint is excellent in supporting his product and this forum.
94 GT, CBAZA/J4J1, 347 (on a R302 block), F303 cam, Performer II Intake, 1.7 Crane RR's, 1 5/8 Shorties, 70MM BBK TB, C&L 85mm Tuner MAF, Pro-Charger D1SC, 60#'s, TKO 600. Runs 11:80's
User avatar
2Shaker
Tuning Addict
 
Posts: 2085
Joined: Thu Jul 22, 2004 8:24 pm
Location: Springboro Ohio

Postby DrDirt » Sun Oct 29, 2006 10:24 am

Could be that Clint is like the rest of us and goes on vacation occasionally.
'86 Mustang Coupe, MegaSquirt 2 extra, 2.3T w/ Holset HX35, T-5, 3.73 gears

'94 Ranger extended cab beater truck, 2.3T stock swap, T-5, Moates QH
User avatar
DrDirt
Tuning Addict
 
Posts: 512
Joined: Wed Jun 30, 2004 6:45 am
Location: Largo, Fl

Postby roaster » Sun Oct 29, 2006 10:40 pm

I just saw that Clint has been replying but I'm not receiving anything.
All is well.
FFR5113K, 5.0 EFI, AFR165, 24#INJ, 70MM BBK TB, X3Z EEC, TrickFlow intake, 70MM FMS MAF, Stock Cam, 2.73 rear
User avatar
roaster
Gear Head
 
Posts: 7
Joined: Thu Oct 05, 2006 8:35 pm
Location: Annandale, VA

Re: EEC Analyzer Registration

Postby BLUOVAL » Sat Jul 04, 2009 12:30 pm

4 July 2009

Has anyone had any contact with Clint Garrity. . . . ? His website and e-mail are non-existant.

Thank,
Jim Taylor
1988 ford F-150 SuperCab, 392 stroker, TF Twisted Wedge O-ring heads, C&L Perm. 76mm MAF, 19lb Inj., CompCam 270RF-HR10 Hyd. Roller Cam & Pro Magnum Rockers, Custom built AOD with Lentech valve Body (scary1-2 shift), 3.73 rear, Tweecer RT, A9P
BLUOVAL
Gear Head
 
Posts: 7
Joined: Fri Oct 29, 2004 9:36 am
Location: NORMAN OK

Re: EEC Analyzer Registration

Postby cgrey8 » Sat Jul 04, 2009 12:55 pm

Website's working just fine on my end:
EEC Analyzer and BinaryEditor Website

As for hearing from him, I got an email from him yesterday I believe. So no problems that I'm aware of. Although it is a holiday weekend. If you are reigstering, give him a few days to respond. He's a 1-man show and he does have a family to be with.
...Always Somethin'

89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, 1.6RRs, FMS Explorer (GT40p) headers, Slot Style MAF, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, Innovate LC-1, GUFB, Moates QuarterHorse tuned using BE&EA

Member V8-Ranger.com
User avatar
cgrey8
Administrator
 
Posts: 9703
Joined: Fri Jun 24, 2005 4:54 am
Location: Acworth, Ga (Metro Atlanta)

Re: EEC Analyzer Registration

Postby 86GT » Sat Jul 04, 2009 1:21 pm

Sorry for the delay. I am not getting the email. I have just checked all of my emails and they have all been responded to. Send me a private message and i will respond to that.
User avatar
86GT
BE/EA Developer
 
Posts: 5059
Joined: Sat Feb 22, 2003 10:19 pm
Location: Dixon, California


Return to Hardware Discussions

Who is online

Users browsing this forum: No registered users and 0 guests

cron